北京11选5

18657520611

13375750788

目录
北京11选5 > 产品中心 > 产品中心

天河画册2-10_12 - 副本.jpg


超薄型钢结构防火涂料

超薄型钢结构防火涂料是由树脂,成碳剂,阻燃剂及其他助剂等组成,遇火时涂成会膨胀增厚,形成耐火隔热层,阻止热量迅速向钢基材,提高钢结构的耐火性能。该产品具有涂层薄、装饰性好、施工方便等优点,适用于各种钢结构承重的建筑群体,特别适用于钢结构的防火保护工程。


The fire retardant coating of ultrathin formed steel construction constitute of resin, carbonicagent,flame-retardant agent and others auxiliaries, the coating will be swell and incrassation whileencountering fire, formed fire-proof thermal-protective coating, and prevent heat transfer to steelsubstrate fast, enhance the fire-proof property of steel substrate. This product have advantage of thincoatingx better decorative and convenientconstruction, apply to building group load-bearing by steelconstruction,especially fire insulation project which used steel structure.


施工方法:

1.该涂料在使用前应充分搅拌至均匀。若涂料太稠,可用配套稀释剂稀释至适宜稠度。

2.涂料施工可采用刷涂、喷涂、辊涂等方式。每次涂刷厚度以0.2mm左右为宜。二次涂刷时间间隔为8至12小时。

3。涂刷完工后,应对涂层表面作平整处理。


1。This coating should stir uniform fully before using。 The coating should be matched to suitable bymatched diluents if it is thick。

2.The coating construction may use the method of brush coating. flame plating. roller coat.Every brush coating should control the thickness around 0.2mm. The second brush coating shouldinterval last time 8 to 12 hours.

3。After brush coating, the coating should be disposed smooth。


黑龙江36选7 北京11选5官网 北京11选5走势图 北京11选5 深圳风采预测 福建体彩31选7 北京11选5 北京11选5官网 北京11选5官网 北京11选5平台